York YKKE Series Installation Manual

Contents

e Page 23 fPanel Installation 10 Panel InstallationCAUTIONDO NOT place the panel facedown on the floor, againsta wall, or on uneven surfaces.Step 1: Remove the front grille.1. Push both of the tabs towards the middlesimultaneously to unlock the hook on the grille.2. Hold the grille at a 45° angle, lift it up slightly anddetach it from the main body.Fig. 10.1Fig. 10.2Fig. 10.3Fig. 10.4Step 2: Install the panelAlign the indicate " " on the decoration panel to theindicate " " on the unit .Attach the decoration panel to the unit with thesupplied screws as shown in figure below.1 Intake grille2 Grille hook1 Decoration panel2 Screws (M5)(supplied with the panel)After installing the decoration panel, ensure that there isno space between the unit body and decoration panel.Otherwise air may leak through the gap and causedewdrop. (See figure below)