Z-CAM E2 User Manual

Also see for E2: User manual User manual Manual Quick start guide

Contents

Z-CAM E2 User Manual Manual pdf 29 page image

C cable:1) Power on the camera.2) In Connect setting, set USB to “Mass storage”.3) Connect the camera to a computer with an USB Type C cable, an “USB” icon wouldshow up on LCD screen, then it’s connected successfully.4) PC will detect the camera and shows it as external storage device. You can access &manage the files in the CFast card inside the camera.5. Connect to the Camera5.1. Wi-Fi ConnectionYou can connect the camera to an external iOS device (iPhone / iPad) or a computer (PC/ Mac) through Wi-Fi with following steps:1. Install a Wi-Fi antenna to the Wi-Fi Antenna Port of the camera.2. In Connect setting menu, set the Wi-Fi to “On”，go back to Connect setting, therewill show the Wi-Fi ID: ZCAM-E2-XXXX (last 4 digits match to camera ID) on the Wi-Fi item.3. Press MENU to go back to Standby screen, there will be a Wi-Fi icon on top of thescreen.4. Connect to the camera from the iOS device or a computer with that Wi-Fi ID, andthe default password of the Wi-Fi is 12345678. (not changeable for now)