* The specifications of any product may change without prior notice to improve the performance thereof. 55. Slightly unscrew the Bolt-B on the Air Duct and turn the top part of the duct to the left or right sothat the duct faces the exhaust fan as shown in Fig. 8. Then, screw in three Bolt-B’s tightly to holdits position.Caution) If the Air Duct cannot face the exhaust fan as shown in Fig. 8 even after turningthe duct fully, separate the duct from the Air Duct Base, make appropriate adjustmentsto the direction of the duct, and reassemble the duct. See Figs. 2 and 9 for a betterunderstanding.6. Connect FAN MATE 1 to the mainboard & the fan as shown in Fig. 10.<Fig. 10. Connecting FAN MATE 1><Fig. 8. Adjusting the Air Duct> <Fig. 9. Assembling the Duct>3-Pin ConnectorMainboardFAN MATE 1Speed Control Knob3-Pin Connector(from CNPS 5700D)AdjustDriverExhaust FanBolt-B

ZALMAN CNPS5700D-Cu User Manual