5IFTQFDJGJDBUJPOTPGBOZQSPEVDUNBZDIBOHFXJUIPVUQSJPSOPUJDFUPJNQSPWFQFSGPSNBODF 71) Installing FAN MATE 2 on the Inside of the System 2) Installing FAN MATE 2 on the Outside of the SystemFAN MATE 2 Installation and Usage11. Thermal Resistance (8) & Noise (dB) CurveConnect the appropriate 3-pin connector on thecable to the motherboard fan header and theCNPS7000B’s fan connector.Pull the 6-pin connector out of the system throughthe back and connect it to FAN MATE 2, whichshould be installed on the case using the includeddouble-sided tape.£When the speed control knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in Silent Mode.Turned fully clockwise, it operates in Normal Mode. You can select the desired fan speed by turning the knob.Note) FAN MATE 2 has been specifically designed for the fan of this product. Zalman Tech Co., Ltd. is notresponsible for any damage to systems or CPUs caused by using it with other types of fans.10. Notes on Usage1) Checking CPU CompatibilityPlease refer to “Compatible CPUs” on page 3 to confirm that your CPU is compatible before using the CPU cooler.2) Cautions During BootingWhen booting the computer, it may automatically power down after an alarm sound by a systemmonitoring program to indicate that the CPU fan is rotating slowly. If this happens, turn the speedcontrol knob fully clockwise to increase the fan speed. Then set ‘CPU Fan Detected’ to ‘Disabled’ in theBIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring program toless than or equal to 1,300rpm.Note) Some motherboards do not boot if the rotational speed of the CPU fan is below a certainrpm. If the BIOS settings are updated, Silent Mode can be used. For more information onupdating your BIOS, please refer to your motherboard manufacturer's website. DisablingCPU fan speed detection in BIOS settings does not affect computer performance.3) OverclockingThe fan should be set to Normal Mode if Overclocking.(Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU Overclocking.)Fan Connector(CNPS7000B)MotherboardDouble-sided TapeFAN MATE 26-Pin Connector