ZIEHL-ABEGG FXDM Operating Instructions Manual

Contents

ZIEHL-ABEGG FXDM Operating Instructions Manual Manual pdf 25 page image

6.3 Menu structurePIN 0010STOP← ← ← ← User Service → → → →Start▼▲ Info▼▲ Setting▼▲ Events▼▲ Base setupP↓ ↑ ESC P↓ ↑ ESC P↓ ↑ ESC P↓ ↑ ESC P↓ ↑ ESCPIN input Frequency Set Internal1 Motor fault Mode▲ ▼ ▲ ▼ ▲ ▼ ▲ ▼ ▲ ▼Language Set external1 Set Internal2 E1 Analog InMenu dependent on device typeSelection of the menu group (e.g. Base setup) to the right through the ▼-key, to the left through the▼-key.You can go to the menu items in the menu groups (e.g. mode of operation) by using the P key. Usethe arrow keys to move up and down within the menu group.The menu groups consist of one area for the user (user menu) and one area for installation (service).The service area can be protected against unauthorized access by using a PIN.In order to simplify the initial start-up operation, the service level is enabled at first. I.e., not protectedby the PIN 0010 (see Controller Setup, PIN protection = OFF). If PIN protection is activated (ON), theservice menu remains enabled after input of PIN 0010 as long as one is pressing keys. If no keys arepressed for ca. 15 minutes, the PIN is automatically erased, i.e. the service level is blocked.To make adjustments, press the P key after selecting the menu item. If the previously set value startsto ash, it can be adjusted with the ▼ + ▲ keys and then saved with the P key. To exit the menuwithout making any changes, use the “Esc” short-key, i.e., the originally set values remain.InformationAfter installation of the device has been carried out, PIN protection should be activated (see ControllerSetup)!6.4 Example for programming mode 2.01 in “Base setup”1 2 3 4 5 6 7ModePMode▲ModePModeOperating Instructions Fcontrol – model series FXDM Controls and MenuL-BAL-E072-GB 1642 Index 008 Part.-No.25/105