ZIEHL-ABEGG ZAmon STICK Manual
                | |
ZAmon STICKCompliance with the following instructions is mandatory to ensure the functionality andsafety of the product. If the following instructions given especially but not limited for generalsafety, transport, storage, mounting, operating conditions, start-up, maintenance, repair,cleaning and disposal / recycling are not observed, the product may not operate safely andmay cause a hazard to the life and limb of users and third parties.Deviations from the following requirements may therefore lead both to the loss of thestatutory material defect liability rights and to the liability of the buyer for the product that hasbecome unsafe due to the deviation from the specifications.General descriptionThe frequency inverters ZAdyn4C, ZAdynpro or ZAdyn4B can be operated by the app-software ZAmon, that is installed on a smartphone or a tablet. The smartphone or tabletcommunicates with the frequency inverter via a Bluetooth®-radio connection. For thecommunication, the Bluetooth adapter "ZAmon STICK" is necessary, that is connected tothe frequency inverter.Intended useThe ZAmon STICK is used to establish a Bluetooth®-radio connection between a smart-phone or a tablet and the frequency inverters ZAdyn4C, ZAdynpro or ZAdyn4B.Using in EuropeZAmon STICK complies with the Radio Equipment Directive (2014/53/EU [RED]).Scope of delivery1x ZAmon STICK1x CAT5 network cable 0,50 mR-TBA19_01-D-GB 1930 Part.-No. 00163467-D-GBenglish |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine