ZIEHL-ABEGG ZETADYN 3BF Brief Instructions

Also see for ZETADYN 3BF: Original operating instructions Technical information

Contents

ZIEHL-ABEGG ZETADYN 3BF Brief Instructions Manual pdf 8 page image

InformationThe in the ZETADYN 3 adjusted nominal travel speed V* has to be equal or higher than the speedwhich is sent to the ZETADYN 3 by the control system. Otherwise no drive takes place.4.2 Info menuThe INFO menu provides an easily accessible overview of:• Current measurements• Current operation conditions ofthe ZETADYN 3• Current switching states ofthe inputs and outputs• Inverter internal measurements• Information about the internal componentsThe individual pages are numbered for increased clarity.This is a CAN specic instruction. Only the pages 14 - 17 will be described. A complete overview isshown in the operating instruction ofthe particular inverter.Display DescriptionCAN--------------- - 14Act· Mode: VelocityT_max: 0 RErr:255NMT:Preop./Warn.Lim:Page 14: CANOperating information (normal view)Line 2:Act: A dot signalizes that the inverter operates with CANMode: Operating mode (velocity or position)Line 3:T_max: Number ofcycles, which excessed the maximum process timeRErr: Recieve buffer - error counterLine 4:NMT: Shows the actual NMT status (see table 4.3)CAN--------------- - 14Act· Mode: VelocityT_max:0.7ms TErr:255NMT:Preop./Warn.Lim:Page 14: CANOperating information (while pressing "Enter")Line 2:Act: A dot signalizes that the inverter operates with CANMode: Operating mode (velocity or position)Line 3:T_max: Maximum time for processing the CAN messges per cycle, since switch-onTErr: Transmit buffer - error counterLine 4:NMT: Shows the actual NMT status (see table 4.3)CAN Velocity------ - 15V_CAN: + 0mm/sContr.:Disable Volt.Status:Sw. On Disab.Page 15: CAN VelocityActive in velocity modeLine 2:V_CAN: Travel speed, sent fron the control system to the ZETADYN 3.Line 3:Contr. Control-byte. Shows commands which are sent by the control systemLine 4:Status: Status-byte. Shows CAN-status ofthe ZETADYN 3CAN Position------ - 16S_CAN + 0mmContr.:Disab. Volt.Status:Sw.On Disab.Page 16: CAN PositionActive in position modeLine 2:S_CAN: Relative target position, sent from the control system to the ZETADYN 3Line 3:Contr. Control-byte. Shows commands which are sent by the control systemLine 4:Status: Status-byte. Shows CAN-status ofthe ZETADYN 3After pressing the "Enter" button the display shows the maximum travelspeed, sent by the control systemCAN Calib. 1------ - 17AbsEnc mm: 5358MotEnc mm:+ 4169Offs:13081A/M 1.28Page 17: CAN Calib.CalibrationLines 2 - 4:For calibrating the distances which were sent by the motor encoder and the shaftencoder.Briefinstruction ZETADYN 3 Series ParameterR-TBA11_01-GB 1114 Part.-No. 00163371-GB7/9

/ 10

Related manuals for ZIEHL-ABEGG ZETADYN 3BF