ZIV SWT User Manual
                                                                                                                                         | |
Contents
| 
SWTGIGABIT/FAST ETHERNET SWITCH TYPE SWT 84/137USER GUIDE - M0SWTA1903Iv09 - V09 March 20195.15.2 MAC listThis submenu permits the authorized client MAC address list to be specified. The list mayor may not be activated in each port through the Security type parameter.The parameters for creating the MACS list are the following:• #. Tabulate element identifier. Not relevant.• Address. The client MAC address entered in the list. If a range is desired to beincluded, the initial address and final address are separated by a hyphen (seeexample in the figure).• Ports. Port/s in which the MAC address will be accepted. A group of discreet portsis configured with the identifier of each one, separated by a comma, withoutspaces. If a range is to be included, the initial port identifier and final port identifierare separated by a dash. The value any means the port is not relevant.• VLANs. Numerical identifier of the VLAN defined in the equipment in which theMAC address will be accepted (VID fields in the VLANs menu). A group of discreetports is configured with the identifier of each one, separated by a comma, withoutspaces. If a range is to be included, the initial and final vlan identifiers areseparated by a dash. The value all means the vlan is not relevant. Example: inequipment with a vlan1, vlan3 and vlan4 defined, the group of numerical identifierswill be 1,3,4.The presence of identifiers in the Ports parameter and VLANs section is notexclusive. If values for both parameters are specified, the configuration is appliedat the indicated ports that also meet the requirement of belonging to VLANsconfigured.FIGURE 47 MAC list submenu configuration page |
Related manuals for ZIV SWT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine