(1) Post the mounting template on thewall. Drill the holes according tothe marks on the template (holesVersion: V1.1 Date: Nov. 2011(2) Remove the screw on the (3) Take away the back plate.(5) Tighten the screw on the bottom,plate on the wall according to the(4) Fix the plastic pad and the backRS485 TCP/IPLock Sensor①③AlarmRS232/RS485 Converter② Exit Button⑤Reader④Bell%BUTTONEXIT⑦⑥for screws and wiring).bottom of device.Access Control System Function(1) If a registered user verified, the device will export thesignal to unlock the door.(3) If the d llegal , it will output anevice is removed i ly(4) isExternal card reader supported.(5) is it isExternal exit button supported, convenient toalarm signal.open the door inside.(7) Supports , modes withRS485 TCP/IP to connect PC. OnePC can manage multiple devices.(6) External door bell is supported.2. Structure and FunctionF18 Installation Guide1. Equipment InstallationWiring HoleIn st ru ct io n fo r th e Mo un ti ng P ap erBe fo re t he d ev ic e is f as te ne d, p le as est ic k th e pa pe r to t he p la ce w he re y ouwa nt t o in st al l it , th en m ak e ho le s an dla y ca bl es a cc or di ng t o th e mo un ti ngpa pe r.F18 Mounting Paper10111213(only for your reference)Fixing HoleFixing HoleFixing HoleFixing Holefix the device to the back plate.(2) Door sensor will detect the on-off state If the door isunexpected opened or improperly closed, the alarm signal(digital value) will be triggered.mounting paper.