ZKTeco UR20RWF Fast Manual

The default reader settings are as follows:Output power 26dBmFrequency 902MHz-928MhzCommunication Interface Wiegand 26Demonstration with instructionsConnect the USB port of the reader to the USB port of the computer.- To play the demo on computer, please click "Connect", on theright side of the middle it will display "Connected Successfully".- RF configuration: Set the RF parameters of the machine, includingpower and spectrum.- Output power: The power range is 10 ~ 33 dBm.- Frequency: They allow its use in multiple applications andsystems. Available for Global Frequencies 902MHz-928Mhz.- Output Mode: The default Wiegand format is WG26 and can be setto WG34 and Hex.- Start Byte: EPC tag has 12 byte data, the default first 3 or 4 byte data,if you set a byte offset value, the output data will start from the setvalue.Reading and writingThe module is used to read and write the EPC card number. Read &Write EPC Area: To read and write data from the EPC area.Read & Write EPC User Area: To read and write EPC user data.ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town,Longgang District, Shenzhen China 518129Tel: +86 755-89602345 Fax: +86 755-89602394www.zkteco.com

/ 4

Related manuals for ZKTeco UR20RWF