Zanussi MULTI BUILT-IN OVENS ZBC 741 Instruction Booklet

Also see for MULTI BUILT-IN OVENS ZBC 741: Instruction book

Contents

Zanussi MULTI BUILT-IN OVENS ZBC 741 Instruction Booklet Manual pdf 16 page image

64TERMINAL BLOCKThe oven has an easily accessible terminal block,which is meant to work with an electric single-phaserate of 230 V.(Fig. 14)The manufacturer disclaims anyresponsability should all the safetymeasures not be carried out.ELECTRICAL CONNECTIONBefore the appliance is connected:1) check that the main fuse and the domestic installationcan support the load;2) check that the power supply is properly earthed incompliance with the current rules;3) check the socket or the double pole switch used forthe electrical connection can be easily reached withthe appliance built in the forniture unit.This appliance is supplied with a type H05 RR-Fconnection cable, section 3 x 1,5 mm 2 . A suitableplug, able to carry the load specified on the ratingplate, must be fitted to the cable. This is a three-wiredcable, with the earth wire marked yellow-green.The plug has to be fitted in a proper socket.If connecting the appliance directly to the electric system,a double pole switch must be installed between theappliance and the electricity supply, with a minimumgap of 3 mm. between the switch contacts and of a typesuitable for the required load in compliance with thecurrent rules. The earth wire must not be interrupted bythe double switch pole.The connection cable has to be placed in order that, ineach part, it cannot reach a temperature 50 °C higherthan the room temperature.After the connection is carried out, test the heatingelements for about 3 minutes.Undertop Recess Dimensions (Fig. 12)FO 2159Fig. 14FO 0039Fig. 13SECURING THE OVEN TO THE CABINETFit the appliance into the cabinet recess.Open teh oven door and secure the oven to the kitchencabinet with four wood screws, which fit the holesprovided in the oven frame (Fig.13).When installing an electric plate hob over the oven, thehob's electrical connection and the oven's one have tobe carried out separately, for security reasons and to letthe oven be taken off the unit easier, if necessary.In-Column Recess Dimensions (Fig. 11)FO 0290FO 2154

/ 16

Related manuals for Zanussi MULTI BUILT-IN OVENS ZBC 741