Downloaded from www.vandenborre.beHbHa8 mm11 Open the appliancedoor and the kitchen furni-ture door at an angle of90°.Insert the small square(Hb) into guide (Ha).Put together the appliancedoor and the furnituredoor and mark the holes.Ha8 mmK12 Remove the bracketsand mark a distance of 8mm from the outer edge ofthe door where the nailmust be fitted (K).Hb13 Place the small squareon the guide again and fixit with the screws sup-plied.Align the kitchen furnituredoor and the appliancedoor by adjusting the partHb.HbHd14 Press the part (Hd) onthe part (Hb).Do a final check to make sure that:• All screws are tightened.• The magnetic sealing strip is attached tightly to thecabinet.Important! If the ambient temperature is low (for example,in the Winter), the size of the gasket decreases. The size ofthe gasket increases when the ambient temperatureincreases.Environmental concernsThe symbol on the product or on its packagingindicates that this product may not be treated ashousehold waste. Instead it should be taken to theappropriate collection point for the recycling of electricaland electronic equipment. By ensuring this product isdisposed of correctly, you will help prevent potentialnegative consequences for the environment and humanhealth, which could otherwise be caused by inappropriatewaste handling of this product. For more detailedinformation about recycling of this product, please contactyour local council, your household waste disposal serviceor the shop where you purchased the product.24