Zanussi ZBB28651SA User Manual

Also see for ZBB28651SA: User manual

Contents

letter “E“ or by the earth symbol or col-oured green and yellow.2. Connect the wire coloured blue to the ter-minal either marked with the letter “N“ orcoloured black.3. Connect the wire coloured brown to theterminal either marked with the “L“ or col-oured red.4. Check that no cut, or stray strands of wireis present and the cord clamp E is secureover the outer sheath.5. Make sure the electricity supply voltage isthe same as that indicated on the appli-ance rating plate.6. Switch on the appliance.The appliance is supplied with a 13 amp plugfitted B. In the event of having to change thefuse in the plug supplied, a 13 amp ASTA ap-proved (BS 1362) fuse must be used.Warning! A cut off plug inserted into a13 amp socket is a serious safety (shock)hazard. Ensure that it is disposed of safely.Door reversibilityThe door of the appliance opens to the right. Ifyou want to open the door to the left, do thesesteps before you install the appliance:• Loosen the upperpin and remove thespacer.• Remove the upperpin and the upperdoor.• Loosen the middlehinge.• Remove the lowerdoor.• Loosen the lowerpin.On the opposite side:• Install the lower pin.• Install the lowerdoor.• Tighten the middlehinge.• Install the upperdoor.• Tighten the spacerand tighten the up-per pin.Ventilation requirementsThe airflow behindthe appliance mustbe sufficient.5 cmmin. 200cm 2min.200cm 2Installing the applianceCaution! Make sure that the mains cablecan move freely.Do the following steps:9www.zanussi.com