78INSTRUCTIONS FOR THE INSTALLERThe following instructions are intended for the installerin order that the operations of installation, regulationand maintenance are carried out in the best possiblemanner and according to the regulations in force. Allinterventions must be carried out with the appliancedisconnected.THE MANUFACTURER DECLINES ALLRESPONSIBILITY FOR DAMAGES CAUSED BYAN INSTALLATION WHICH DOES NOT COMPLYWITH THE REGULATIONS IN FORCE.Installation and maintenance of the appliance must becarried out by a professional qualified according to thearticles regulating the art in force, noteably: NBND51003.For appliances connected to the electricity network:regulation NBN.We shall not be responsible in case of accidents orincidents caused by inexisting or defective earthing.PLACEMENTThe appliance is of type X.It has been designed to be placed between two otherunits whose sides can tolerate temperaturesexceeding that of the room by 75˚C.WHEN THE COOKER IS FIRST INSTALLEDOnce the cooker has been installed it is important toremove the protective materials which were put on inthe factory.Switch the oven control to MAX and leave it to run,empty, for 30 minutes to remove any unpleasant newsmells.Please ensure that when the appliance is installed it iseasily accessible for the engineer in the event of abreakdown.LEVELLINGThe cookers are supplied with adjustable feet fitted onthe back and front angles of the base.The feet can be regulated (Fig. 18) to adjust the heightof the appliance to that of the neighbouring units andfor an even distribution of liquids contained in pans.Fig. 18FO 0063