Zanussi ZCG ID Operating And Installation Instructions

Also see for ZCG ID: Operating instructions

Cleaning between the outer and inner doorglass.You can remove the glass from the oven and grill doors if you need to.Note: For top oven door it is important not to open the door when theglass is removed because the door is lighter and it will spring shut.To remove the outer glass1 Open the door so you can get at the two cross head screws on thetop of the door.Note: Open top oven door slightly to access screws.2 Loosen these two screws using a pozidrive screwdriver.3 You should hold the door glass securely in place with one hand,whilst removing the screws completely, with the other hand. If you donot do this, the door glass could fall forward.4 Using both hands, gently tilt the top of the door glass towards you.Lift it slightly to disengage the locators at the bottom of the door.5 Clean the outer and inner glass using hot soapy water and mildabrasives such as 'Jif'. DO NOT try to clean the aluminium foil whichis inside the door. The foil is there to keep the door cool, if it isdamaged it will not work.6 Replace the glass by holding it in both hands and gently placing thelocators into the holes of the brackets at the bottom of the door, andmake sure the screw location holes line up.7 Hold the glass in place with one hand and replace the cross headscrews into the location holes, with the other hand.8 Tighten the screws using a pozidrive screwdriver. Close the door.33Z C G I DCare and cleaningPlease note that the doorglass on your product maydiffer in type and shape fromthat shown in the diagram.