Zanussi ZCG43TC0WA User Manual

Removing and cleaning the doorglasses - main ovenThe door glass in your product canbe different in type and shape fromthe example you see in the image.The number of glasses can also bedifferent.1. Push the door trim at one side to remove it.12A2. Pull up the trim.3. Remove the glass panels.To replace the glass panels, do thesame steps in reverse. Before youlower the trim, attach the A trim partto the door. Refer to the image.Replacing the lampPut a cloth on the bottom of the interior of theappliance. It prevents damage to the lamp glasscover and the cavity.WARNING!Danger of electrocution! Disconnectthe fuse before you replace thelamp.The lamp and the lamp glass covercan be hot.1. Deactivate the appliance.2. Remove the fuses from the fuse box ordeactivate the circuit breaker.The back lampThe lamp glass cover is at the backof the cavity.1. Turn the lamp glass cover counterclockwiseto remove it.2. Clean the glass cover.3. Replace the oven lamp with a suitable 300°C heat-resistant oven lamp.Use the same oven lamp type.4. Install the glass cover.TroubleshootingWARNING!Refer to Safety chapters.What to do if...Problem Possible cause RemedyYou cannot activate the appli-ance.The appliance is not connectedto an electrical supply or it isconnected incorrectly.Check if the appliance is correct-ly connected to the electricalsupply.You cannot activate the appli-ance.The fuse is blown. Make sure that the fuse is thecause of the malfunction. If thefuse is blown again and again,contact a qualified electrician.18 www.zanussi.com