Zanussi ZCG551GNC User Manual

Also see for ZCG551: User manual User manual User manual

Contents

Gas burnersBURNER NORMAL POWER NATURAL GASkW inj. 100/mm Btu/hAuxiliary burner 1,0 70 3412Semi-rapid burner 2,0 96 6483Rapid burner 2,9 119 10236Grill 2,7 120 9212Top Oven 1,9 99 6483Main Oven 1,9 99 6483Gas ConnectionUse a flexible pipe in compliance with the regu-lation in force. Be careful they do not come intouch with mobile parts or they are notsqueezed.Warning! Only a qualified and competentperson must do the gas installation.Warning! Before gas connectiondisconnect the mains plug from themains socket or switch off the fuse in thefuse box. Close the primary valve of thegas supply.Supply piping should not be less thanR3/8. Connection is made to the Rc ½(1/2 “ B.S.P.) female threaded. Entry pipe loca-ted just below the hob level on the rear lefthand side of the appliance.The gas supply ramp is on the rear side of theappliance.Warning! Only liquid sealants to be usedwhen inlet gas pipe is fitted i.e.: do not useP.T.F.E. sealant tape.When installation is complete. Carry out a gastightness test and make sure that the seal ofeach pipe fitting is correct.Important! Use flexible tubing, which complywith BS.669 current edition.ABCCDEWarning! The gas bayonet must be inmark area.Dimension mmA 250B 680C 50D 250E 580Pressure testThe Rapid injector is used as a pressure testpoint.1. Connect the pressure gauge to the Rapidinjector.22 www.zanussi.com