Zanussi ZCG63210BA User Manual

If the burner does not ignite, adjust the crownand cap again.Turning the burner offTo put the flame out, turn the knob to the offposition .WARNING!Always turn the flame down orswitch it off before you remove thepans from the burner.Lid Safety DeviceLid has safety device, which cuts off the gassupply for the hob. It works only when the lid isclosed.WARNING!Always use the knob for the hob toswitch off a burner. Do not use thelid as a cut-off device.Hob - Hints and tipsWARNING!Refer to Safety chapters.CookwareWARNING!Do not put the same pan on twoburners.WARNING!Do not put unstable or damagedpots on the burner to prevent fromspill and injury.CAUTION!Make sure that pot handles are notabove the front edge of the cooktop.CAUTION!Make sure that the pots are placedcentrally on the burner in order toget maximum stability and to getlower gas consumption.Diameters of cookwareWARNING!Use cookware with diametersapplicable to the size of burners.Burner Diameter of cook-ware (mm)Rapid 180 - 260Semi-rapid 120 - 220Auxiliary 80 - 160Hob - Care and cleaningWARNING!Refer to Safety chapters.General information• Clean the hob after each use.• Always use cookware with clean bottom.• Scratches or dark stains on the surface haveno effect on how the hob operates.• Use a special cleaner applicable for thesurface of the hob.• Wash stainless steel parts with water, andthen dry them with a soft cloth.Pan supportsThe pan supports are not resistantto washing in a dishwasher. Theymust be washed by hand.1. Remove the pan supports to easily cleanthe hob.Be very careful when youreplace the pan supports toprevent the hob top fromdamage.2. The enamel coating occasionally can haverough edges, so be careful when you washwww.zanussi.com 9