Control panel and functions● Never use the dishwasher if the electricalsupply cable and water hoses are damaged;or if the control panel, work top or plinth areaare damaged such that the inside of theappliance is freely accessible. Contact yourlocal Service Force centre, in order to avoidhazard.4Programme selector dial andOn/Off switchStart/Cancel buttonDelay start buttonSalt and rinse aidlightsEnd of programme light● All sides of the dishwasher must never bedrilled to prevent damage to hydraulic andelectric components.WARNING!For electrical and water connection carefullyfollow the instructions given in specificparagraphs.Programme selectordial and On/Off switch● when in this position, the machine is switched off (corresponding light off),● when the marker on the dial corresponds with a programme, the machineis switched on and a programme is selected (corresponding light on)Start/Cancel button● Starting the washing programme:1. Select a washing programme.2. Press the Start/Cancel button (corresponding light on).IMPORTANT!Once the programme has started, if you want to change the selection madeyou must cancel the washing programme in progress.● Cancel the washing programme in progress:1. Press and hold the Start/Cancel button until the corresponding lightturns off.2. Release the Start/Cancel button.3. Turn the programme selector dial to the Off position or select a newwashing programme (check that there is detergent in the detergentdispenser).156999670en.qxp 3/6/2006 2:09 PM Pagina 4