Zanussi ZDF 4010 User Manual

Contents

Programme 1) Degree of soilType of loadProgrammephasesDuration(min)Energy(kWh)Water(l)3) Fresh soilCrockery andcutleryWash 65 °CRinse30 0.9 94) Normal soilCrockery andcutleryPrewashWash 50 °CRinsesDry155 - 165 1.0 - 1.1 13 - 155)All Prewash 12 0.1 41) The pressure and the temperature of the water, the variations of the mains supply, the options and thequantity of dishes can change the programme duration and the consumption values.2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts thetemperature and quantity of the water, the energy consumption and the programme duration.3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.4) This is the standard programme for test institutes. With this programme you have the most efficient use ofwater and energy consumption for crockery and cutlery with normal soil.5) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes andbad odours to come out from the appliance.Do not use detergent with this programme.Information for test institutesFor all the necessary information for test performance. send an email to:info.test@dishwasher-production.comWrite down the product number (PNC) that is on the rating plate.OptionsMultitab optionActivate this option only when you use the com-bi detergent tablets.This option deactivates the flow of rinse aid andsalt. The related indicators are off.The programme duration can increase.Activating the multitab functionActivate or deactivate the multitab functionbefore the start of a programme. You can-not activate or deactivate this function while aprogramme operates.1. Press the on/off button to activate the appli-ance.2. Make sure that the appliance is in settingmode. Refer to ‘SETTING AND STARTINGA PROGRAMME'.3. Press and hold function buttons (D) and (E)at the same time until the multitab indicatorcomes on.The function stays on until you deactivateit. Press and hold function buttons (D) and(E) at the same time until the multitab indicatorgoes off.If you stop to use the combi detergenttablets, before you start to use separatelydetergent, rinse aid and dishwasher salt,do these steps:1. Deactivate the multitab function.2. Set the water softener to the highest level.3. Make sure that the salt container and therinse aid dispenser are full.5www.zanussi.com