Zanussi ZDF3023S User Manual

Also see for ZDF3023: User manual

Contents

Zanussi ZDF3023S User Manual Manual pdf 11 page image

3To remove filters (B)and (C), turn the han-dle counterclockwiseand remove. Pullapart filter (B) and(C). Wash the filterswith water.A4Remove filter (A).Wash the filter withwater.DA5Put filter (A) to its ini-tial position. Makesure that it assemblescorrectly under thetwo guides (D).6Assemble filters (B)and (C). Put them in-to position in filter(A). Turn the handleclockwise until itlocks.An incorrect position of the filters cancause bad washing results and damage tothe appliance.Cleaning the spray armsDo not remove the spray arms.If the holes in the spray arms are clogged, re-move remaining parts of soil with a thin pointedobject.External cleaningClean the appliance with a moist soft cloth.Only use neutral detergents. Do not use abra-sive products, abrasive cleaning pads or sol-vents.TroubleshootingThe appliance does not start or it stops duringoperation.Before you contact the Service, refer to the in-formation that follows for a solution to the prob-lem.With some problems, the display showsan alarm code:• - The appliance does not fill with water.• - The appliance does not drain the wa-ter.• - The anti-flood device is on.Warning! Deactivate the appliance beforeyou do the checks. Turn the programmeknob until the programme marker is alignedwith the off position.Problem Possible cause Possible solutionThe programme does notstart.The mains plug is not connected inthe mains socket.Connect the mains plug.11www.zanussi.com