Zanussi ZDF4014WA User Manual

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ 40Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 42Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 42Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 43Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 43Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 45Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 47Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 48Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ 49Technical information _ _ _ _ _ _ _ _ _ _ _ 50Environment concerns _ _ _ _ _ _ _ _ _ _ _ 51Garantie, Garanzia, Guarantee _ _ _ _ _ _ 51Subject to change without notice.Safety instructionsBefore the installation and use of the appli-ance, carefully read the supplied instructions.The manufacturer is not responsible if an in-correct installation and use causes injuries anddamages. Always keep the instructions withthe appliance for future reference.Children and vulnerable people safetyWarning! Risk of suffocation, injury orpermanent disability.• Do not let persons, children included, withreduced physical sensory, reduced mentalfunctions or lack of experience and knowl-edge use the appliance. They must have su-pervision or instruction for the operation ofthe appliance by a person who is responsi-ble for their safety.• Do not let children play with the appliance.• Keep all packaging away from children.• Keep all detergents away from children.• Keep children and pets away from the appli-ance door when it is open.Installation• Remove all the packaging.• Do not install or use a damaged appliance.• Do not install or use the appliance wherethe temperature is less than 0 °C.• Obey the installation instruction suppliedwith the appliance.Electrical connectionWarning! Risk of fire and electricalshock.• The appliance must be earthed.• Make sure that the electrical information onthe rating plate agrees with the power sup-ply. If not, contact an electrician.• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters and exten-sion cables.• Make sure not to cause damage to themains plug and to the mains cable. Shouldthe appliance power supply cable need tobe replaced, this must be carried out by ourService Centre.• Connect the mains plug to the mains socketonly at the end of the installation. Make surethat there is access to the mains plug afterthe installation.• Do not pull the mains cable to disconnectthe appliance. Always pull the mains plug.• Do not touch the mains cable or the mainsplug with wet hands.• This appliance complies with the E.E.C. Di-rectives.Water connection• Make sure not to cause damage to the wa-ter hoses.• Before you connect the appliance to newpipes or pipes not used for a long time, letthe water flow until it is clean.• The first time you use the appliance, makesure that there is no leakage.40 www.zanussi.com