Zanussi ZDT13012FA User Manual

Contents

Filling the rinse aid dispenser121212343214To adjust the released quantity of rinse aid,turn the selector between position 1 (lowestquantity) and position 4 (highest quantity).Daily use1. Open the water tap.2. Press the on/off button to activate the ap-pliance.• If the salt indicator is on, fill the salt con-tainer.• If the rinse aid indicator is on, fill therinse aid dispenser.3. Load the baskets.4. Add the detergent.5. Set and start the correct programme forthe type of load and the degree of soil.Using the detergent12122 03 0A B32 03 04Put the detergent or the tablet in compartment(A) If the programme has a prewash phase,put a small quantity of detergent in compart-ment (B).Using the combi detergent tabletsWhen you use tablets, that contain salt andrinse aid, do not fill the salt container and therinse aid dispenser. The rinse aid indicator al-ways comes on if the rinse aid dispenser isempty.1. Adjust the water softener to the lowest lev-el.2. Set the rinse aid dispenser to the lowestposition.If you stop to use the combi detergenttablets, before you start to useseparately detergent, rinse aid anddishwasher salt, do these steps:1. Set the water softener to the highest level.7www.zanussi.com