Zanussi ZDT15006FA User Manual

Contents

Care and cleaningWarning! Before maintenance, deactivatethe appliance and disconnect the mainsplug from the mains socket.Dirty filters and clogged spray arms de-crease the washing results.Make a check regularly and, if necessary, cleanthem.Cleaning the filters1CBA23To remove filters (B)and (C), turn the han-dle counterclockwiseand remove. Pullapart filter (B) and(C). Wash the filterswith water.A4Remove filter (A).Wash the filter withwater.DA5Put filter (A) to its ini-tial position. Makesure that it assemblescorrectly under thetwo guides (D).6Assemble filters (B)and (C). Put them intoposition in filter (A).Turn the handleclockwise until itlocks.An incorrect position of the filters cancause bad washing results and damage tothe appliance.Cleaning the spray armsDo not remove the spray arms.If the holes in the spray arms are clogged, re-move remaining parts of soil with a thin pointedobject.External cleaningClean the appliance with a moist soft cloth.Only use neutral detergents. Do not use abra-sive products, abrasive cleaning pads or sol-vents.Internal cleaningIf you regularly use short duration programmes,these can leave deposits of grease and lime-scale inside the appliance.To prevent this, we recommend to run long du-ration programmes at least 2 times per month.TroubleshootingThe appliance does not start or it stops duringoperation.Before you contact the Service, refer to the in-formation that follows for a solution to the prob-lem.With some problems, different indicatorsflash continuously or intermittently at thesame time to show an alarm code.11www.zanussi.com