Zanussi ZDT200 User Manual

Also see for ZDT200: User manual Instruction book

Zanussi ZDT200 User Manual Manual pdf 23 page image

– The end indicator light flashes to show the levelof the water softener.Example: 5 flashes, pause, 5 flashes, pause, etc...= level 5.7. Press the programme selection/cancel button onetime to increase the water softener level by one step.8. Press the on/off button to save the operation.Use of dishwasher saltCaution! Only use dishwashers salt. Types of saltthat are not applicable for dishwashers causedamage to the water softener.1 23Fill the salt container with1 litre of water (only thefirst operation).45 6It is normal that water overflows from the salt con-tainer when you fill it with salt.Make sure that there is no grain of salt outer of thesalt compartment. Salt which stays on the tank fora while drills the tank. It is recommended to start a wash-ing programme immediately after you fill the salt con-tainer. This prevents of corrosion because of spilled salt.When you set electronically the water softener to level 1,the salt indicator light does not stay on.Use of rinse aidCaution! Only use branded rinse aid fordishwashers.Do these steps to fill the rinse aid dispenser:1 223