Zanussi ZDT21006FA User Manual

Also see for ZDT21006FA: User manual

Contents

• The indicator is on = the acoustic signal is activated.4. Press the on/off button to confirm the setting.ACTIVATING AIRDRYAirDry improves the drying results with less energy consumption.By default, AirDry is activated with all programmes excluding (if applicable) but it is possible todeactivate it.While the drying phase operates, the device opens the appliance door. The door is then keptajar.While the appliance is in user mode, within about 5 seconds:1. Press the programme button twice.• The indicators and are on.• The indicator flashes.2. Wait until the indicators and are off.• The indicator is on = AirDry is activated.3. Press the programme button to change the setting.• The indicator is off = AirDry is deactivated.4. Press the on/off button to confirm the setting.CAUTION! If children have access to the appliance, it is advised to deactivate AirDry asopening the door may pose a danger.BEFORE FIRST USE1. Make sure that the current level of thewater softener agrees with the hardnessof the water supply. If not, adjust the levelof the water softener.2. Fill the salt container.3. Fill the rinse aid dispenser.4. Open the water tap.5. Start a programme to remove any processingresiduals that can still be inside the appliance.Do not use detergent and do not put dishes inthe baskets.After starting the programme, the appliancerecharges the resin in the water softener for up to 5minutes. The washing phase starts only after thisprocedure is complete. The procedure is repeatedperiodically.8