Zanussi ZDT311 User Manual
Also see for ZDT311: User manualUser manual
                    | |
• Do not put the water inlet hose or the safety valve inwater.• If the water inlet hose or the safety valve is damaged,immediately disconnect the mains plug from the mainssocket.• Only let the Service Force Centre replace the water inlethose with safety valve.Drain hose1Connect the water drainhose to the sink spigot.max 85 cmmin 40 cmmax 400 cm23 4The internal diameter must not be smaller than the diam-eter of the hose.If you connect the water drain hose to a trap spigot underthe sink, remove the plastic membrane (A). If you do notremove the membrane, remaining food can cause a block-age in the drain hose spigot.Caution! Make sure that the water couplings aretight to prevent water leakage.Electrical connectionWarning! The manufacturer is not responsible ifyou do not follow these safety precautions.Ground the appliance according to safety precautions.Make sure that the rated voltage and type of power on therating plate agree with the voltage and the power of thelocal power supply.Always use a correctly installed shockproof socket.Do not use multi-way plugs, connectors and extensioncables. There is a risk of fire.Do not replace the mains cable yourself. Contact theService Force Centre.Make sure that the mains plug is accessible afterinstallation.Do not pull the mains cable to disconnect the appliance.Always pull the mains plug.17 |
Related manuals for Zanussi ZDT311
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine