Zanussi ZDTS 101 User Manual

Zanussi ZDTS 101 User Manual Manual pdf 24 page image

Electrical connectionCAUTION!Safety standards require the appliance to beearthed.Prior to using the appliance for the first time,ensure that the rated voltage and type of supplyon the rating plate match that of the supplywhere the appliance is to be installed.The fuse rating is also to be found on the ratingplate.Always plug the mains plug into a correctly in-stalled shockproof socket. Multi-way plugs,connectors and extension cables must not beused.This could constitute a fire hazard through over-heating.If necessary, have the domestic wiring systemsocket replaced. In case that the electrical ca-ble has to be replaced, contact your local Serv-ice Force centre.The plug must be accessible after the appliancehas been installed.Never unplug the appliance by pulling on thecable. Always pull the plug.The manufacturer accepts no liability for failureto observe the above safety precautions.Fitting under a counterIMPORTANT!Carefully follow the instructions on the enclosedtemplate for building in the dishwasher and fit-ting the furniture panel.WARNING!The dishwasher must be secured against tilting.Therefore make sure that the counter it is fixedunder, is suitably secured to a fixed structure(adjacent kitchen units cabinets, wall).This dishwasher is designed to be fitted undera kitchen counter or work surface.No further openings for the venting of thedishwasher are required, but only to let the wa-ter fill and drain hose and power supply cablepass through.The dishwasher incorporates adjustable feet toallow the adjustment of the height.During all operations that involve accessibilityto internal components the dishwasher has tobe unplugged.Be sure that once the appliance has been in-stalled, it is easily accessible for the serviceengineer in the event that a repair is required.LevellingGood levelling is essential for correct closureand sealing of the door.When the appliance is correctly levelled, thedoor will not catch on either side of the cabinet.If the door does not close correctly, loosen ortighten the adjustable feet until the machine isperfectly level. (See enclosed template).24