10SOMETHING NOT WORKINGIf the appliance is not working correctly, please carry out the following checks before contacting your localZanussi Service Force CentreIf after the above checks your appliance still does not operate correctly, contact your local Zanussi ServiceForce Centre.In-guarantee customers should ensure that the above checks have been made, as the engineer willmake a charge if the fault is not a mechanical or electrical breakdown.Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.SymptomNo power to the applianceThe temperature in the freezer section is too highThe freezer door will not openThe compressor runs continouslyExcessive frost and ice has built upNoiseSolutionCheck there is power at the socket.Check there is not a power cut by checking thehousehold lights.Check the fuse has not blown.Check the thermostat control knob is turned to thecorrect setting relative to ambient conditions.Check the ambient temperature is within theappliance’s operating limits, please refer to theinstallation section in this instruction book.Relocate the appliance if necessary.Has door just been opened? If so leave for a fewminutes to allow the air pressure to equalise.Adjust the thermostat control knob to give correcttemperature control. See “Setting the temperature”.Check that the doors are closed.Large quantities of food have recently been placed inthe cabinet and/or door is frequently opened.Check that air ventilation is not obstructed.Ensure the doors are not left open.Check that nothing is preventing the doors fromclosing.Is the door gasket intact and clean.Has advised periodic defrosting been carried out.Refer to normal operating sounds.