Zanussi ZFC627WAP User Manual

Also see for ZFC627WAP: User manual User manual User manual User manual User manual

Contents

Zanussi ZFC627WAP User Manual Manual pdf 3 page image

• Clean the appliance with a moist soft cloth. Only use neutraldetergents. Do not use abrasive products, abrasive cleaningpads, solvents or metal objects.• Do not store explosive substances such as aerosol cans with aflammable propellant in this appliance.• If the supply cord is damaged, it must be replaced by themanufacturer, its Authorised Service Centre or similarlyqualified persons in order to avoid a hazard.SAFETY INSTRUCTIONSINSTALLATIONWARNING! Only a qualified personmust install this appliance.• Remove all the packaging and the transit bolts.• Do not install or use a damaged appliance.• Follow the installation instruction supplied withthe appliance.• Always take care when moving the appliance asit is heavy. Always use safety gloves andenclosed footwear.• Make sure the air can circulate around theappliance.• At first installation or after reversing the doorwait at least 4 hours before connecting theappliance to the power supply. This is to allowthe oil to flow back in the compressor.• Before carrying out any operations on theappliance (e.g. reversing the door), remove theplug from the power socket.• Do not install the appliance close to radiators orcookers, ovens or hobs.• Do not install the appliance where there is directsunlight.• Do not install this appliance in areas that are toohumid or too cold, such as the constructionappendices, garages or wine cellars.• When you move the appliance, lift it by the frontedge to avoid scratching the floor.ELECTRICAL CONNECTIONWARNING! Risk of fire and electricalshock.• The appliance must be earthed.• Make sure that the parameters on the ratingplate are compatible with the electrical ratingsof the mains power supply.• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters and extensioncables.• Make sure not to cause damage to the electricalcomponents (e.g. mains plug, mains cable,compressor). Contact the Authorised ServiceCentre or an electrician to change the electricalcomponents.• The mains cable must stay below the level of themains plug.• Connect the mains plug to the mains socketonly at the end of the installation. Make sure thatthere is access to the mains plug after theinstallation.• Do not pull the mains cable to disconnect theappliance. Always pull the mains plug.USEWARNING! Risk of injury, burns,electrical shock or fire.• Do not change the specification of thisappliance.• Do not put electrical appliances (e.g. ice creammakers) in the appliance unless they are statedapplicable by the manufacturer.• Be careful not to cause damage to therefrigerant circuit. It contains isobutane (R600a),a natural gas with a high level of environmentalcompatibility. This gas is flammable.• If damage occurs to the refrigerant circuit, makesure that there are no flames and sources ofignition in the room. Ventilate the room.• Do not let hot items to touch the plastic parts ofthe appliance.• Do not put soft drinks in the freezercompartment. This will create pressure on thedrink container.3