Zanussi ZFT 13 JD Instruction Book

Contents

39GBChange of door opening directionShould the setting-up place or handling demand it,door-opening direction can be refitted from right-handed to left-handed.Following operations are to be done on the basis offigures and explanations:Break the circuit of the appliance.Tilt back the appliance carefully being careful sothat the compressor can not touch the floor. It isrecommended to ask another person for help,who can keep the appliance at this positionsafely.Unscrew the adjustable feet situated on bothsides (2 pieces), in addition the screws fixing thelower door holders (3 pieces) and the screw onthe other side respectively.Take off the freezer door by pulling it slightlydownwards.Unscrew the top door hinge pin of the refrigeratorthen screw it back on the other side.Fit the freezer door on the upper door hinge pin.Put over the pin in the lower door holding plate inthe direction of the arrow.Take the door off.Unscrew the top door holding pin and put it onthe other side.Put over the handles on the other side and putthe plastic covering nails supplied in the plasticbag of this instruction book into the holes setfree.Put the appliance to its place, set it level andapply voltage to it.In case you do not want to perform the proceduresabove, call the nearest brand-mark service.Technicians will accomplish the refitting expertly forcharge.Electrical connectionThis refrigerator is designed to operate on a 230V AC (~) 50 Hz supply.The plug must be put into a socket withprotective contact. If there is no such, it isrecommended to get an electrician to fit anearthed socket in compliance with standardsnear the refrigerator.This appliance complies with the followingE.E.C. Directives:- 73/23 EEC of 19.02.73 (Low Voltage Directive) andsubsequent modifications,- 89/336 EEC of 03.05.89 (ElectromagneticCompatibility Directive) and subsequentmodifications.