Zanussi ZFU27401WA User Manual

Also see for ZFU27401WA: User manual

Contents

Door reversibilityImportant! To carry out the followingoperations, we suggest that this be made withanother person that will keep a firm hold on thedoors of the appliance during the operations.To change the opening direction of the door, dothese steps:• Remove the plug from the power socket.• Tilt back the appliance carefully so that thecompressor cannot touch the floor.1. Remove the plinth.2. Unscrew and re-move the lower hing-es.3. Remove the door.214. Unscrew the upperpin and screw it onthe opposite side.5. Refit the door.6. Make sure theedge of the door isparallel with the edgeof the top.AB7. Unscrew the pin(A) and screw it onthe opposite side.8. Remove the cap(B) and position it onthe opposite side.9. Screw the lowerhinges.10. Refit the plinth.11. Stand the appli-ance upright.12. Fit the handle onthe opposite side andput the plastic caps(contained in the in-structions bag) in thefree holes.Do a final check to make sure that:• All screws are tightened.• The door opens and closes correctly.If the ambient temperature is cold (i.e. in Win-ter), the gasket may not fit perfectly to the cabi-net. In that case, wait for the natural fitting of thegasket.In case you do not want to carry out the abovementioned operations, contact the nearest AfterSales Service Force. The After Sales Servicespecialist will carry out the reversibility of thedoors at your cost.Technical informationDimensionHeight 1850 mmWidth 595 mmDepth 658 mmRising Time 20 hVoltage 230 - 240 VFrequency 50 HzThe technical information are situated in the rat-ing plate on the internal left side of the appli-ance and in the energy label.23www.zanussi.com