Zanussi ZGF 642 Instruction Booklet

Also see for ZGF 642: Instruction booklet

Contents

Zanussi ZGF 642 Instruction Booklet Manual pdf 10 page image

11Important safety requirements650 mm420 mm420 mm100 mm50 mm50 mm55 mm600 mm700 mm420 mm100 mm420 mm50 mm55 mm50 mmICLEARANCES REQUIREDWHEN FITTING THE HOBWITHOUT A COOKER HOOD ABOVECLEARANCES REQUIREDWHEN FITTING THE HOBWITH A COOKER HOOD ABOVEFO 0813FO 0812700 mmThis hob must be installed in accordance with the GasSafety (Installation and Use) Regulations (CurrentEdition) and the IEE Wiring Regulations (CurrentEdition).Detailed recommendations are contained in thefollowing British Standards Codes Of Practice: B.S.6172/ B.S. 5440, Par. 2 and B.S. 6891 CurrentEditions.The hob should not be installed in a bed sitting roomwith a volume of less than 20 m3 . If it is installed in aroom of volume less than 5 m 3 an air vent of effectivearea of 110 cm2 is required. If it is installed in a roomof volume between 5 m3 and 10 m3 an air vent ofeffective area of 50 cm 2 is required, while if thevolume exceeds 11 m 3 no air is required.However, if the room has a door which opens directlyto the outside no air vent is required even if thevolume is between 5 m 3 and 11 m 3 .If there are other fuel burning appliances in the sameroom, B.S. 5440 Part 2 Current Edition, should beconsulted to determine the requisite air ventrequirements.LocationThe hob may be located in a kitchen, a kitchen/dineror bed sitting room, but not in a bathroom or showerroom.Before making the cut out in the worktop ensure thatthere is a minimum distance of 55 mm. between therear edge of the hob and the wall.A minimum distance of 100 mm. must be leftbetween the side edges of the hob and any adjacentcabinets or walls.The minimum distance combustible material can befitted above the hob in line with the edges of the hobis 420 mm. If it is fitted below 420 mm. a space of 50mm. must be allowed from the edges of the hob.The minimum distance combustible material can befitted directly above the hob is 700 mm.