Zanussi ZGF 753 Instruction Booklet

Contents

1 0INSTALLATION AND ASSEMBLYThese hobs can be installed in a kitchen unit with anopening for insertion whose dimensions are shown inFig. 13.The edge of the cut out must have a minimum distancefrom the rear wall of 55 mm.If there are side walls, or sides of the furniture unit nearthe hob, the cut out edges must have a minimumdistance of 150 mm. as shown in Fig. 13.Carry out the building in of the hob as follows:• put the relevant sealings, supplied with the hob,on the edges of the cut out: place them at 8 mmfrom the front and rear edge and at 50 mm fromthe side edges, as shown in Fig. 14, taking carethat the sealings meet without overlapping;• place the hob in the cut out, taking care of its centring;• fix the hob with the relevant screws (Fig. 15). Thetraction of the screws is able to trace the sealing, anyexcess of which can then be easily removed.The edge of the hob forms a double labyrinth sealwhich provides a total guarantee against infiltration ofliquids.Fig. 13Fig. 14Fig. 15FO 2038FO 0199aa) sealing

/ 12

Related manuals for Zanussi ZGF 753