Zanussi ZGG 643 Instruction Booklet

Also see for ZGG 643: Operating instructions

Contents

55047058051055 min.7. Building InFig. 8A = Auxiliary burner SR = Semirapid burnerR = Rapid BurnerThese hobs can be inserted in a built-in kitchen unitwhose depth is between 550 and 600 mm. The hobsdimensions are shown in Fig. 9.The edge of the cut out must have a minimum distancefrom the rear wall of 55 mm.If there are side walls, or sides of the furniture unit nearthe hob, the cut out edges must have a minimumdistance of 100 mm.Hanging forniture units or hoods must be placed at 650mm. minimum from the hob.FO 2034a) Sealing gasketFITTING THE HOB TO THE WORKTOPBefore fitting the hob into the cut out, an adhesive sealmust be fitted to the underside outside edge (Fig. 9) ofthe hob. It is essential that no gaps are left in this sealin order to prevent spillage near the hob seeping intothe cabinet below.1) Remove the pan supports, the burners caps andcrowns and turn the hob upside down, taking care theignition candles are not damaged in this operation.2) Place the sealing gasket all around the glass topedge as shown in Fig. 9.3) Fit the hob in the cut out and push it down until theglass top and the working top come in touch, as shownin Fig. 10.Fig.9AFig.10FO 2108FO 2107SRSRRAW

/ 11

Related manuals for Zanussi ZGG 643