Zanussi ZGG 78 Instruction Booklet

Contents

5Hob burners control knobsThe symbols on the hob burners control knobs mean that:z there is no gas supplythere is maximum gas supplythere is minimum gas supplyLighting the burnersFor easier lighting, proceed before putting apan on the pan support.To light a burner:z Push in the relevant knob and turn it anticlockwiseto "maximum position".z At the same time, keep the knob pushed down forabout 5 seconds. This will allow the "thermocouple"(Fig. 1, lett. C) to be heated and the safety deviceto be switched off, otherwise the gas supply wouldbe interrupted.z Then, check the flame is regular and adjust it asrequired.If you cannot light the flame even after several attempts,check the "cap" (Fig. 1, lett. A) is in the correct position.To put the flame out, turn the knob to the symbol z.Always turn the flame down or put it outbefore taking the pans off the burner.Using the hob correctlyTo ensure maximum burner efficiency, it is stronglyrecommended that you use only pots and pans with abottom fitting the size of the burner used, so that flame willnot spread beyond the bottom of the vessel (See tablebeside).It is also advisable, as soon as a liquid starts boiling, toturn down the flame so that it will barely keep the liquidsimmering.Use only pans or pots with flat bottom.Carefully supervise cookings with fats oroil, since these types of foodstuff can resultin a fire, if over-heated.Instruction for the User)Fig. 1Burner minimum maximumdiameter diameterLarge (triple crown) 180 mm 260 mmMedium (semi-rapid) 120 mm 220 mmSmall (auxiliary) 80 mm 160 mmA - Burner capB - Ignition candleC - ThermocoupleD - Burner crownADCB