• Make sure you position the pan supports correctly aftercleaning.• To make burners work correctly, make sure that thearms of the pan supports are in the centre of the burn-er.• Be very careful when you replace the pan supports toprevent the hob top from damage.After cleaning, dry the appliance with a soft cloth.Removing the dirt:1. – Remove immediately: melting plastic, plastic foil,and food containing sugar.– Stop the appliance and let it cool down before youclean: limescale rings, water rings, fat stains, shi-ny metallic discolorations. Use a special cleanerapplicable for surface of hob.2. Clean the appliance with a damp cloth and some de-tergent.3. At the end rub the appliance dry with a clean cloth.In order to properly place the pan supports, make surethat the arms of the pan support are positioned in corre-spondence with the hole placed at the base of the burner.This way, the pan support will be stable and fixed.Cleaning of the spark plugThis feature is obtained through a ceramic ignition candlewith a metal electrode. Keep these components well cleanto prevent difficult lighting and check that the burnercrown holes are not obstructed.Periodic maintenancePeriodically speak your local Service Force Centre tocheck the conditions of the gas supply pipe and the pres-sure adjuster, if fitted.What to do if…Problem Possible cause RemedyThere is no spark when lighting thegas• There is no electrical supply • Make sure that the unit is connec-ted and the electrical supply isswitched on.• Control the fuse. If the fuse is re-leased more than one time, referto a qualified electrician.• Burner cap and crown are placeduneven• Make sure that the burner cap andcrown are in correct positions.The flame is blow out immediately af-ter ignition• Thermocouple is not heated suffi-cient• After lightning the flame, keep theknob pushed for approximately 5seconds.The gas ring burns unevenly • Burner crown is blocked with foodresidues• Make sure that the injector is notblocked and the burner crown isclear of food particles.9