Zanussi ZGG75524 User Manual

Also see for ZGG66424: User manual User manual User manual

Contents

3. Adjust the flame after it is regular.If after some tries the burner does notlight, check if the crown and its cap are incorrect positions.342112341 Burner cap2 Burner crown3 Ignition candle4 ThermocoupleWarning! Do not keep the control knobpushed for more than 15 seconds.If the burner does not light after 15 seconds,release the control knob, turn it into off positionand try to light the burner again after minimum1 minute.Important! In the absence of electricity youcan ignite the burner without electrical device;in this case approach the burner with a flame,push the relevant knob down and turn itcounter-clockwise to maximum gas releaseposition.If the burner accidentally goes out, turn thecontrol knob to the off position and try tolight the burner again after minimum 1 minute.The spark generator can start automatical-ly when you switch on the mains, after in-stallation or a power cut. It is normal.Turning the burner offTo put the flame out, turn the knob to the sym-bol .Warning! Always turn the flame down orswitch it off before you remove the pansfrom the burner.Helpful hints and tipsEnergy savings• If possible, always put the lids on the pans.• When the liquid starts to boil, turn down theflame to barely simmer the liquid.Warning! Use pots and pans withdiameter applicable to the dimension ofburner.Do not use cooking vessels on the hotplate thatoverlap its edges.Burner Diameters of cookwareTriple Crown 180 - 260 mmRapid 180 - 260 mmRear Semi-rap-id120 - 220 mmFront Semi-rap-id120 - 180 mmAuxiliary 80 - 160 mm9www.zanussi.com