Zanussi ZK69 Instruction Book

Contents

Installation195 Fit the (A) screws in the desired set of holesfor 85, 88 or 90 cm worktop height ( SEE ILLU -STRATION A).6 Lift the cooker back into the upright positionand connect it to the electrical supply. Push thecooker into place and adjust its level (see below)before fitting the safety equipment.Levelling the cookerThe cooker must be level, for example to ensure that oilin frying pans is of even depth. To check whether thecooker is level, place a spirit level or a frying pan filledwith water on the hob.You can lower (-6 mm) or raise (+12 mm) thewheels and feet, working from the front of the cooker.Use a Phillips screwdriver to adjust the rear wheels,and adjustable pliers for the front feet (1). Once thecooker is properly level, you need to lock these feetwith the nut. Turn it anticlockwise (2) using thespanner supplied.Electrical connectionRepairs and work on the cooker must be carriedout by a QUALIFIED ELECTRICIAN. Work performedby unqualified persons can damage the cooker,and may also lead to personal injury and/ordamage to property.The connection options for the cooker are shown onthe plate on the rear of the cooker. Wattage and voltageis stated on the rating plate (see the right-hand side ofthe cooker).12