Zanussi ZOP37902 User Manual

Also see for ZOP37902: User manual User manual User manual User manual

Contents

Zanussi ZOP37902 User Manual Manual pdf 20 page image

screen-printing zones is not rough when youtouch it.A BMake sure that you install the middle panel ofglass in the seats correctly.Replacing the lampPut a cloth on the bottom of the interior of theappliance. It prevents damage to the lamp glasscover and the cavity.WARNING!Danger of electrocution! Disconnectthe fuse before you replace thelamp.The lamp and the lamp glass covercan be hot.CAUTION!Always hold the halogen lamp with acloth to prevent grease residue fromburning on the lamp.1. Deactivate the appliance.2. Remove the fuses from the fuse box ordeactivate the circuit breaker.The back lamp1. Turn the lamp glass cover counterclockwiseto remove it.2. Clean the glass cover.3. Replace the lamp with a suitable 300 °Cheat-resistant lamp.4. Install the glass cover.TroubleshootingWARNING!Refer to Safety chapters.What to do if...Problem Possible cause RemedyThe oven does not heat up. The oven is deactivated. Activate the oven.The oven does not heat up. The clock is not set. Set the clock.The oven does not heat up. The necessary settings are notset.Make sure that the settings arecorrect.The oven does not heat up. The automatic switch-off is acti-vated.Refer to "Automatic switch-off".20 www.zanussi.com