Zanussi ZRT724X User Manual

Also see for ZRT724W: User manual User manual User manual

squashed or damaged power plug may overheatand cause a fire.3. Make sure that you can come to the mains plugof the appliance.4. Do not pull the mains cable.5. If the power plug socket is loose, do not insertthe power plug. There is a risk of electric shockor fire.6. You must not operate the appliance without thelamp cover 6) of interior lighting.• This appliance is heavy. Care should be taken whenmoving it.• Do not remove nor touch items from the freezer com-partment if your hands are damp/wet, as this couldcause skin abrasions or frost/freezer burns.• Avoid prolonged exposure of the appliance to directsunlight.• Bulb lamps 7) used in this appliance are special pur-pose lamps selected for household appliances useonly. They are not suitable for household room illu-mination.Daily Use• Do not put hot pot on the plastic parts in the appliance.• Do not store flammable gas and liquid in the appli-ance, because they may explode.• Do not place food products directly against the airoutlet on the rear wall.8)• Frozen food must not be re-frozen once it has beenthawed out.• Store pre-packed frozen food in accordance with thefrozen food manufacturer's instructions.• Appliance's manufacturers storage recommendationsshould be strictly adhered to. Refer to relevant instruc-tions.• Do not place carbonated or fizzy drinks in the freezercompartment as it creates pressure on the container,which may cause it to explode, resulting in damageto the appliance.• Ice lollies can cause frost burns if consumed straightfrom the appliance.Care and cleaning• Before maintenance, switch off the appliance and dis-connect the mains plug from the mains socket.• Do not clean the appliance with metal objects.• Do not use sharp objects to remove frost from the ap-pliance. Use a plastic scraper.• Regularly examine the drain in the refrigerator for de-frosted water. If necessary, clean the drain. If thedrain is blocked, water will collect in the bottom ofthe appliance.InstallationImportant! For electrical connection carefully follow theinstructions given in specific paragraphs.• Unpack the appliance and check if there are damageson it. Do not connect the appliance if it is damaged.Report possible damages immediately to the placeyou bought it. In that case retain packing.• It is advisable to wait at least four hours before con-necting the appliance to allow the oil to flow back inthe compressor.• Adequate air circulation should be around the appli-ance, lacking this leads to overheating. To achievesufficient ventilation follow the instructions relevantto installation.• Wherever possible the back of the product should beagainst a wall to avoid touching or catching warmparts (compressor, condenser) to prevent possibleburn.• The appliance must not be located close to radiatorsor cookers.• Make sure that the mains plug is accessible after theinstallation of the appliance.• Connect to potable water supply only.9)Service• Any electrical work required to do the servicing ofthe appliance should be carried out by a qualified elec-trician or competent person.• This product must be serviced by an authorized Serv-ice Centre, and only genuine spare parts must be used.6) If the lamp cover is foreseen7) If the lamp is foreseen8) If the appliance is Frost Free9) If a water connection is foreseen15