Zanussi ZT 56 Instruction Booklet

Also see for ZT 56: Instruction booklet

Contents

9If after the above checks, there is still a fault, call your local Service Force Centre.In-guarantee customers should ensure that the above checks have been made as the engineer will make acharge if the fault is not a mechanical or electrical breakdown.Please note that proof of purchase is required for any in-guarantee service calls.Symptom SolutionNo power to applianceThe light does not come onThe temperature in the fridge is too highThe compressor runs continuouslyExcessive frost and ice has built upNoiseWater under the salad drawers- Check there is power at the socket.- Check there is not a power cut by checking thehousehold lights.- Check the fuse has not blown.- Ensure that the bulb is correctly fitted.- Replace the bulb if it has blown.- Check the door light switch is not jammed.- Check the ambient temperature is within the appliancesoperating limits of 10˚C to 32˚C.Relocate the appliance if necessary.- Check the thermostat is turned to the correct settingrelative to ambient conditions.- Adjust the thermostat to give correct temperaturecontrol. See page 5.- Check that the door is closed.- Large quantities of food have recently been placed inthe cabinet/and or door is frequently opened.- Check that air ventilation is not obstructed.- Ensure the door is not left open.- Check that nothing is preventing the door from closing.- Is the door gasket intact and clean.- Refer to normal operating sounds.- Check the drain hole is not blocked (see “Maintenanceand Cleaning”).SOMETHING NOT WORKING?Before contacting your local Service Force Centre check the following points.IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use orinstallation, a charge will be made even if the appliance is under guarantee.