14InsIns trtructions fuctions for the Insor the Instt allerallerModelGross capacity (l)Net capacity (l)Width (mm)Height (mm)Depth (mm)Energy consumption (kWh/day)(kWh/year)Energy class, according to EU StandardsFreezing capacity (kg/24h)Rising time (h)Rated power (W)Weight (kg)ZV 1750505255205870.68248B7178525Installing the applianceTransportation, unpackingThe appliance and the interior fitting are protected fortransport.Remove all packaging and any adhesive tape.Any remnants of adhesive can be removed usingwhite spirit.After transportation the appliance must not beswitched on for 2 hours. This is to allow therefrigerant to settle.CleaningClean the accessories and the inside of the appliancewith warm water and bicarbonate of soda (5 ml to0.5 litres of water). Rinse and dry thoroughly.Do not use detergents, abrasive powders, highlyperfumed cleaning products, wax polishes orcleaning products containing bleach or alcohol.LocationThe appliance should be positioned in a wellventilated, dry room.Energy use is affected by the ambient temperature.The appliance should therefore:not be installed next to radiators, cookers orother sources of heatonly be installed at a location where the ambienttemperature corresponds to the climateclassification, for which the appliance isdesigned.The climate classification can be found on the serialplate.The following table shows which ambienttemperature is correct for each climateclassification:Climate Classification Ambient TemperatureSN +10 to +32 ∞CN +16 to +32 ∞CST +18 to +38 ∞C