Zanussi ZVC 67 Instruction Booklet

Contents

7Door reversal directions (Fig. 5)Before carrying out the operations described below,pull out the mains plug from the wall socket.To carry out this reversal go through the followingsteps:dismantle the lower hinge (3), pin (1), the threadedinsert (4) and the screw (2);slide the door out from pin (5), unscrew the pin andreposition on the opposite side;unscrew the left front foot and reposition on theopposite side;unscrew the two screws which mask the holes forfixing the hinge from the left front side;reassemble the door;reassemble the lower hinge (turning it 180° ), thethreaded insert, the pin and the screw on theopposite side, as shown in the figure;dismantle the handle (6) and reassemble it on theopposite side.AttentionAfter completion of the door reversibility operation,verify that the door gasket is adherent to thecabinet.If the ambient temperature is cold (i.e. in Winter),the gasket may not fit perfectly to the cabinet. Inthat case, wait for the natural fitting of the gasketor accelerate this process by heating up the partinvolved with a normal hairdrier.Fig. 5D193/B180°654312