Zanussi ZVT 64 X User Information

Also see for ZVT 64 X: Installation and operating instructions

Contents

Zanussi ZVT 64 X User Information Manual pdf 13 page image

13Installation Instructions1 Safety instructionsWarning! This must be read!The laws, ordinances, directives and standardsin force in the country of use are to be followed(safety regulations, proper recycling in accord-ance with the regulations, etc.)Installation may only be carried out by a quali-fied electrician.The minimum distances to other appliancesand units are to be observed.Anti-shock protection must be provided by theinstallation, for example drawers may only beinstalled with a protective floor directly under-neath the appliance.The cut surfaces of the worktop are to be pro-tected against moisture using a suitable seal-ant.The sealant seals the appliance to the work topwith no gap.The sealant seals the appliance to the work topwith no gap.Do not use silicon sealant between the appli-ance and the work top.Avoid installing the appliance next to doors andunder windows. Otherwise hot cookware maybe knocked off the rings when doors and win-dows are opened.z Risk of injury from electricalcurrent.• The electrical mains terminal is live.• Make electrical mains terminal free of volt-age.• Follow connection schematic.• Observe electrical safety rules.• Ensure anti-shock protection by installingcorrectly.• The appliance must be connected to theelectrical supply by a qualified electrician.z Risk of injury from electricalcurrent.• Loose and inappropriate plug and socketconnections can make the terminal overheat.• Have the clamping connections correctly in-stalled by a qualified electrician.• Use strain relief clamp on cable.• In the event of single-phase or two-phaseconnection, the appropriate mains cable oftype H05BB-F Tmax 90°C (or higher) or anequivalent type must be used.• If this appliance’s mains cable is damaged, itmust be replaced by a special cable (typeH05BB-F Tmax 90°C; or higher) or an equiv-alent type. Please contact your local ServiceForce Center for further advice.A device must be provided in the electrical in-stallation which allows the appliance to be dis-connected from the mains at all poles with acontact opening width of at least 3 mmSuitable isolation devices include line protect-ing cut-outs, fuses (screw type fuses are to beremoved from the holder), earth leakage tripsand contactors.