D5110/D5111/D7110 User Manual40User name, Password: Type the user name and Password of the user who has themail account. This setting is necessary when the SMTP server which sends e-mailsperforms authentication. Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You canspecify up to three recipient E-mail addresses. Administrator e-mail address: Type the Administrator e-Mail address up to 64characters. This address is used for reply mail and sending system messages from the SMTPserver. Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mailwhich is sent according to the IP notification. Message: Type the text of the E-mail up to 384 characters. Default value providesnetwork information including IP, Port, MAC, Model, Firmware Version and Web Version.6.4 SecurityClick the folder of Security to display the sub folders including Account and HTTPS.6.4.1 AccountThe device fault account and password setting is “admin / admin”. That means everyonewho knows IP address can access the device including all configuration. It is necessary toassign a password if the device is intended to be accessed by others. User name: Set a user name between 4-16 characters. Password: Set a password between 4-16 characters.