2.2 Camera control panelThis function is only for PTZ Camera series.1. Click the pulldown box to choose between MPEG4 and MJPEG videocompression mode.2. Click View Size to select the desired display image resolution among VGA 640X480 orVGA320X240.3. Other camera control functions:You can use the tool bar to optimize video brightness, contrast, and saturation. You canalso modify the Picture settings in the Setting Menu under Basic Setting.4. Audio buttons::Speakers turned on. :Speakers turned off.:Microphone turned on. :Microphone turned off.: Volume control bar.Note:• It means the speakers of your computer are turned on to transmit the sounds fromthe connected IP camera(s). Similarly, means you can broadcast to the connectedIP camera(s) via the Ethernet using your microphone.5. Video play buttons::Zoom in. :Pause the current video.:Stop the current video. :Play the video.:Record the current video.:Zoom in /out.2.3 Adjusting the Monitor ImageMonitoring the camera image1. Log into the homepage to display the main console.2. Select between MPEG4 and MJPEG video compression mode.3. Click the View Size box to choose among VGA 640X480 or VGA320X240 resolutions.5