6. Call Settings366.5.2 Parameters DescriptionSet parameters in edit area when you create a new strategy. Press [Add] button to save it.• Description: the description of this strategy.• Type: the execute mode of this strategy: pre-routing or post-routing.Call filtration can be used in two locations: before number transforming before routing(pre-routing) and after number transforming after routing (post-routing). Pre-routing modestops some calls before they are transformed before routing. post-routing mode stops somecalls after they are transformed after routing. For most stoped calls, they are stoped beforerouting, and post-routing mode is an extended feature.Note: If you choose 'post-routing' mode, please set 'destination line list' first.• Source Line: the type of source devices (includes FXO, GSM, CDMA, IP ) and portsavailable(may be multi-chosen ). For example: 'Slot1-2' means the 2nd port of the 1st card.• Caller Pattern: the pattern of caller number (pattern's rule, see 6.1 number matching rules ).Blank means all patterns are valid.• Callee Pattern: the pattern of callee number (pattern's rule, see 6.1 number matching rules).Blank means all patterns are valid.• Strategy: the action of this strategy: Accept or Drop.Note: There are two default strategies you can choose. They are 'accept all calls' and 'drop allcalls'• Schedule: the valid time segment of this strategy. 'NULL' means no limitation.• Destination Line: the type of destination devices (includes FXO, GSM, CDMA, IP) and portsavailable (may be multi-chosen ). For example: 'ALL' means all ports of this card are available.You need to set it if you select 'post-routing' mode.6.6 ScheduleAll time segments used in Call Settings are managed here. In this menu, you can add, edit ordelete time segment.6.6.1 Add a ScheduleThere is no record in time segment list here when you first set it. click 'Add …' to create aschedule and specify details of the schedule.Note: Create a group before you add a schedule, and set specific time after group creation.