Assembly000000-1363-329 SL 120 11.07.200619Assembling the DigiCam Illuminator• Remove the plastic cover (1, Fig. 19) on the swivel arm (6, Fig. 19) ofthe slit projector.• Insert the DigiCam Illuminator's (4, Fig. 19) centring bolt (5, Fig. 19)into the centring hole (7, Fig. 19), such that the LED (3, Fig. 19) facestowards the patient side.• Insert the DigiCam Illuminator's power cable (2, Fig. 19) into therelevant socket (10, Fig. 19) on the slit lamp's power supply(8, Fig. 19).• If the slit lamp does not have a separate power supply (e.g.examination units), a separate 6 V power supply (11, Fig. 19) isrequired for the DigiCam Illuminator. Insert the DigiCam Illuminatorpower cable (2, Fig. 19) into the relevant socket (12, Fig. 19) on thepower supply.1 Plastic cover 7 Centring hole2 Connector 8 Rear of the power supply3 LED 9 Socket for fixation lamp cable4 DigiCam Illuminator 10 Socket for the DigiCam Illuminator5 Centring bolt 11 Separate power supply (6 V)6 Slit projector swivel arm 12 Connector for the DigiCam IlluminatorFig. 19 Assembling the DigiCam Illuminator123456789 101112

Zeiss SL 120 User Manual