Zeiss Stemi 305 Operating Manual

Also see for Stemi 305: Operating manual

Zeiss Stemi 305 Operating Manual Manual pdf 29 page image

Stereo microscope OPERATIONStemi 305 Setting reflected-light illumination ZEISS01/2015 435063-7044-001 294.2.2 Spot illuminator• Push spot illuminator in the guide to the re-quired height (Fig. 21/2).In the lower positions, an oblique lighteffect is created to produce cast sha-dows for enhancing surface structures.• Set the angle (Fig. 21/1) via the pivot of thespot illuminator so that the object is optimallyilluminated.• Set size and brightness of the spot by axiallyshifting the focusing unit (Fig. 21/3)(illumination zoom).For switching the illumination intensityON and OFF and adjusting theillumination intensity refer to Section4.2.1, page 28.4.2.3 Double spot illuminator• Move the microscope body to its uppermostposition via the focusing knob (Fig. 22/1). Pushdouble spot illuminator (Fig. 22/2) to therequired level within the guide.• Bend the two goose necks (Fig. 22/3) to adjustthe spots so that the specimen is optimallyilluminated.For switching the illumination intensityON and OFF and adjusting theillumination intensity refer to Section4.2.1, page 28.Here again, an oblique light effect canbe produced in the lower positions withthe goose neck set horizontally.The spot illuminator and the double spot illuminator have a thread M24 for placingpolarization filters in front. The appropriate analyzer is screw-fastened in the M52x1.0 threadof the microscope body (Fig. 7/4).By turning the spot polarizers, overexposure reflexes on the specimen can be reduced.Fig. 21 Setting the spot illuminatorFig. 22 Double spot illuminator